Our company specialized in Cable/Electrical Wire/ Conductor product
Copper Conductor, Mica Tape Wrapped, XLPE Insulation, Individual & Overall Screen, LSOH Bedding, Galvanized Steel Wire Armoring, LSOH Sheath Instrumentation Cable
construction:CU / MG / XLPE / IS / OS / LSOH / SWA / LSOH
conductor construction:Solid or Stranded
insulation material: XLPE
shield construction:Aluminum/polyester tape is applied over each pair metallic side down in contact with tinned copper drain wire, 0.5mm²
armor construction:Galvanized steel wire armor
sheath material:EPR (Ethylene propylene rubber)
specification or package can be produced as your request.INQUIRY
The armored fire resistant versions (Part 1 Type 2) are typically used in chemical and process industries where there is danger of fire. The galvanized steel wire armor provides excellent protection.
Annealed or tinned copper, sizes: 0.5mm² and 0.75mm² multi-stranded(Class 5),
0.5 mm², 1.0 mm² solid(Class 1), 1.5mm² or 2.5mm², multi-stranded(Class 2) to BS6360
Two insulated conductors uniformly twisted together with a lay not exceeding 100mm
Aluminum/polyester tape is applied over each pair metallic side down in contact with tinned copper drain wire, 0.5mm²
Aluminum/polyester tape is applied over the laid up pairs metallic side down in contact with tinned copper drain wire, 0.5mm²
LSOH(Low Smoke Zero Halogen) sheath
Galvanized steel wire armor
LSOH(Low Smoke Zero Halogen) sheath Flame retardant to IEC60332-3-22 Fire resistant to IEC60331 Halogen free to IEC60754-1
Black or blue
-20˚C up to + 90˚C (fixed installation)
0˚C to +50˚C (during operation)
Minimum bending radius: 5 x OD
|Conductor Area Size||mm²||0.5||0.5||0.75||1||1.5|
|Conductor Stranding||No. x mm||1 x 0.8||16 x 0.2||24 x 0.2||1 x 1.13||7 x 0.53|
|Conductor resistance max||ohm/km||36.8||39.7||26.5||18.2||12.3|
|Insulation resistance min||Gohm/km||5||5||5||5||5|
|Capacitance unbalance at 1 kHz(pair to pair screen)||pF/250m||250||250||250||250||250|
|Max. Mutual Capacitance @ 1 kHz forNon OS or OS cables (except one-pair and two- pairs)||pF/m||115||115||115||115||120|
|Max. Mutual Capacitance @ 1 kHz IS/OS cables (include 1 pair and 2 pair)||pF/m||75||75||75||75||85|
|Max. L/R Ratio for adjacent cores(Inductance/ Resistance)||μH/ohm||25||25||25||25||40|
|Test voltage Core to core||V||1000||1000||1000||1000||1000|
|Test voltage Core to screen||V||1000||1000||1000||1000||1000|
|Rated voltage max||V||300/500||300/500||300/500||300/500||300/500|
|No.of Pairs||No.and Dia. of Wires||Nominal Conductor Cross- Sectional Area||Nominal Thick- ness of Insulation||Nominal Thick- ness of bedding||Nominal Dia. over Bedding||Nominal Thick- ness of Armour||Nominal Thick- ness of Sheath||Nominal Dia. of Cable||Approx. Weight|
The above data are approximate and subject to normal manufacturing tolerance.
Other types can be provided on specific request.
On non-returnable wooden drums or as customer request
1.Sufficient support for our tendering representatives.
2.OEM service available based on official & legal authorization.
3.Strict quality control system.
4.Faster lead time than our competitors.
5.Excellent quality with reasonable price.
6.Strong technical support (technical data, drawing, etc.)
7.Cable solutions to your particular requirements.
8.Free sample is available with economic express fee.
9.12 months quality guarantee after delivery.
COPYRIGHT © 2017 Henan Province Xinchang Copper Co.,Ltd.