It is a heavy serious problem if water in cables, sometimes work were supposed to be done in perfect, but the result show us cruel: cable is damaged with water in.

How does the cable got in trouble by water?

Here the following may be easy caught when in project:

1. storage: two heads will be sealed when new cable purchased,however when cut some, the left one may be strapped only with PVC bag,which is not good at sealing. With time going on, stamper or water would infiltrate into the cable.
2. installation: when cable warped by PVC bag immerse into water, the water would catch time to infiltrate without any hesitation, during working on pulling and wearing pipe,it would lead to cable sheath broken.
3. after installation: when cable installation work finished, its head did not sealed in time or in correct just leave cable expose to air or immerse to water, that’s the usual problem on construction site.

 3 Tips on cable, how to prevent cable free from water

1. No matter cable to be in stock or install, the cable head should be sealed with the special sleeve for cables, it could help the damp out of the cable.
2. to sealing the cable head in time when cable installed.

Strength the cable sealing craft, for it is much more easily break down if water in cable; so that’s to say, the good sealing on cable head would help cable service life extend.

3. cable branch box and Cable feeder pillar would work others cable not be damaged if one branch failed to work due to water.